Price Clear







Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 211 - 240 of 335 products

img
SAVERM2.10

Gundam Accessories - Glow in the dark Sticker (10cm x 15cm)

Dimension: 10 cm x  15 cm 

Colors: Jade Color under daylight and, grow in the dark. 

Guide: 
1) Let the paper absorb light for 30 minutes to an hour (you may use torch light, or place under the sun), and it may grow it's light for a long time. 

2) Cut the paper to the right size to be used on the gundam, and stick on it, that's it. 

Tips: Stick the foil sticker included in the bandai original gundam box at the back of this product, and follow the size to cut the shape to ease the re-modelling.

RM3.90
img
SAVERM8.90

Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam

- Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
img
SAVERM7.10

[Da Lin] Number Symbol Water Decal (Bronzing Gold Color Coating)

[Da Lin] Number Symbol Water Decal (Bronzing Green Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
img
SAVERM7.10

[Da Lin] Alphabet Symbol Water Decal C013 (Bronzing Gold Color Coating)

[Da Lin] Alphabet Symbol Water Decal (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Zeta Gundam

[Da Lin] Water Decal for RG 1/144 Zeta Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Zeta Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM3.10

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam Astray Gold Frame Amatsu Mina
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM17.90
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Unicorn Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Sinanju

[Da Lin] Water Decal for RG 1/144 Sinanju


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Sinanju Gundam Water Decal
-- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong 

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Full Armor Unicorn Gundam

[Da Lin] Water decal for RG 1/144 Full Armor Unicorn Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Full Armor Unicorn Gundam
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Gundam 00 Qan[T]

[Da Lin] RG Gundam 00Q Water Decal (RG06)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam 00 Qan[T] Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gundam Astray Red Frame Kai
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Gundam Double X (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Gundam Double X (Bronzing Color Coating) 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for MG Gundam Double X Water Decal
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for  MG 1/100 RM. Aile Strike Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Aegis Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for RG 1/144 X-1 Crossbone Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HIRM 1/100 Red Frame

[Da Lin] Water Decal for Hi-Resolution 1/100 Astray Red Frame Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Special design for Hi-Resolution 1/100 Astray Red Frame Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Buster Gundam

[Da Lin] Water Decal for MG 1/100 Buster Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Buster Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/00 Duel Gundam

[Da Lin] Water Decal for MG 1/100 Duel Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Duel Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Blue Frame 2nd Revise

[Da Lin] Water Decal for MG 1/100 Astray Blue Frame 2nd Revise

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Astray Blue Frame 2nd Revise
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Providence Gundam

[Da Lin] Water Decal for MG 1/100 Providence Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Providence Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Justice Gundam

[Da Lin] Water Decal for MG 1/100 Justice Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Justice Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Blast Impulse Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Blue Frame D

[Da Lin] Water Decal for MG 1/100 Astray Blue Frame D

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Astray Blue Frame D
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Turn Red

[Da Lin] Water Decal for MG 1/100 Astray Turn Red

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Astray Turn Red
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM11.00

[Da Lin] Water Decal for MG 1/100 Powered Gundam Astray Red Frame & 150 Gerbera Straight

[Da Lin] Water Decal for MG 1/100 Powered Gundam Astray Red Frame & 150 Gerbera Straight

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Powered Gundam Astray Red Frame & 150 Gerbera Straight
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Banshee Unicorn

[Da Lin] Water Decal for MG 1/100 Banshee Unicorn

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Banshee Unicorn
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
PO PriceRM27.00

HG 1/100 VF-19 Fire Valkyrie with Sound Booster Decals

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  MAY 2024
Estimate arrival : JUN 2024

- P-O Price RM27
- Deposit RM10, Balance RM17
- We will inform to make balance RM17.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

These decals are made especially for Bandai's 1/100-scale HG model kit of the VF-19 Fire Valkyrie with Sound Booster! Order yours today!

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Add to cart

Showing 211 - 240 of 335 products